Ultra Heavy 19mm Tali Strapping Band 7600N Polyester PET Strapping

Model 1910 PET strapping band is our ultra-heavy-duty profile, built for the loads that lighter straps simply cannot hold. With a 19 mm ultra-wide width and a 1.0 mm thickened body, it reaches a breaking strength of 7600 N, the level of holding power demanded by steel coils, granite and marble slabs, cement pallets and oversized machinery through long ocean freight. The widened, thickened face spreads extreme load pressure across the package, so the strap resists breakage and cargo collapse instead of failing at a single stress point. As a direct PET strapping manufacturer, we extrude every 1910 roll from virgin PET resin on our own lines, which keeps tensile strength and weld performance consistent from one batch to the next.

The 1910 coil above is extruded from 100% virgin PET raw material with a 19 mm ultra-wide, 1.0 mm thick profile. Its heavy load-bearing face distributes pressure evenly, and its rust-free body protects finished surfaces through the toughest transport.

• Ultra-Wide 19 mm Load Surface: the widest profile in our range spreads extreme load pressure and removes the local stress concentration that breaks lighter straps.
• 7600 N Breaking Strength: super-heavy-load performance that replaces traditional steel banding on coils, slabs and oversized machinery.
• Rust-Free and Burr-Free: PET never rusts and carries no sharp burrs, so it is safe to handle and will not stain galvanized or painted goods.
• Thickened 1.0 mm Body: the heavy-gauge body resists cutting, abrasion and deformation under repeated stacking and vibration.
• High Weld Strength: a weld efficiency of 85% or higher holds rated strength even on high-tension automated tools.
• Anti-Aging and Weather-Resistant: stable performance across long-distance ocean and land transport in humid and cold conditions.
• Recyclable and Lightweight: replaces steel banding while cutting pallet weight and handling risk.

Once a load crosses into the super-heavy class, the deciding factor is no longer convenience but pure holding power. The 19 mm width gives the strap the largest contact area in our range, so the same breaking strength is applied over more surface and the risk of the strap cutting into the edges of a coil or slab falls sharply. Combined with a 7600 N rating, this lets exporters replace steel banding on loads that would otherwise demand expensive, corrosion-prone metal strap. The result is a safer, rust-free, lighter pallet without giving up any of the strength the load requires.

Every 1910 strap is extruded from virgin resin on our own lines and then stretched to align its polymer molecules. That in-house control is exactly why the 7600 N tensile strength and stable elongation hold true from one production batch to the next.

On super-heavy loads, PET strapping is now the practical replacement for traditional steel banding. The differences show up clearly side by side:

The practical result is rust-free pallets, lighter freight weight and a safer packing line for your crew, while still delivering the holding power a heavy load needs.

1910 PET strapping is built for super-heavy industry: steel and aluminium coils, granite and marble slabs, cement and ceramic pallets, large machinery and oversized finished goods. It is the direct replacement for steel banding on heavy loads where rust, sharp edges and metal weight are constant problems. It performs reliably across long-distance ocean freight, rail and road transport.

On super-heavy pallets, the 1910 profile holds coils, slabs, machinery and mixed heavy loads securely. The ultra-wide surface keeps the bundle square and intact even when the load shifts during handling.

Every production batch is checked before it leaves the line, so quality is confirmed rather than assumed:

• Tensile testing: each batch is pulled to confirm the rated 7600 N breaking strength and the 11%–14% elongation range.
• Dimension inspection: width and thickness are measured to hold the 19 mm and 1.0 mm specification, together with core diameter and roll length.
• Surface inspection: every roll is inspected for consistent embossing, clean edges and uniform colour before packing.
• Weld strength check: heat-sealed joints are tested to confirm a weld efficiency of ≥85%.

Each 1910 roll is wrapped in thick waterproof film and packed in reinforced export cartons, then stacked on wooden pallets wrapped in stretch film and secured with PET strap for stable loading. We welcome third-party inspection and factory audits; our manufacturing process is certified to ISO 9001, and our raw materials are SGS-verified, PFAS-free and halogen-free.

Finished rolls are consolidated onto export pallets and unitised with the same PET strap we sell — the clearest proof of its holding power under real shipping conditions.

Each roll is wound on a rigid 250 mm core and precision-cut to a consistent 19 mm width, so the strap feeds cleanly through high-tension automated heads and manual tensioners alike.

• Q: What is the difference between 1910 and a standard PET strap? 1910 is our ultra-heavy-duty profile: a wider 19 mm face, a thicker 1.0 mm body and a 7600 N breaking strength, designed for loads that lighter medium or heavy-duty straps cannot hold.
• Q: Can 1910 replace steel banding on steel coils? Yes. With a 7600 N rating and a rust-free, burr-free, surface-safe body, 1910 replaces steel banding on coils, slabs and oversized machinery without staining or scratching the goods.
• Q: Is 19mm PET strapping suitable for ocean export? Yes. 1910 is built for long-distance ocean and land transport; it resists aging, keeps its tension through vibration and load settlement, and ships in waterproof export cartons for humid sea freight.
• Q: Do you offer customization and samples? Yes. Width, thickness, colour, roll length and roll weight can all be customised, with printed logo and custom core labels available. Free pre-sales samples are supplied for load testing.