5040N PET Strapping Band Impact Resistant Tali Strapping For Brick Cotton Bale Bundling

Hello, I am the engineer who makes this strap, and I will explain it in plain language even if you are new to strapping. This 1409 is our medium-heavy duty PET strap: 14 mm wide and 0.9 mm thick, sold 20 kg to a roll. It is made for the goods that give ordinary straps trouble — bricks, cotton bales and steel coils — because those loads are heavy and their sharp corners push hard against the band. A widened 14 mm width and a thicker 0.9 mm body spread that force out, so the strap resists impact and pressure instead of cutting or stretching loose. If your loads are too heavy for a light strap but do not need our very biggest size, this is the grade I would put in your hands.

This is a 1409 roll. The wider 14 mm face and thicker body are what let it take the impact and edge pressure of heavy loads like bricks and bales without letting go.

• Medium-Heavy Duty Strength: a 5040 N breaking strength, roughly 510 kg of pull before it snaps — a big step up from a light strap.
• Impact and Pressure Resistant: the widened 14 mm width and thickened 0.9 mm body spread the load so it resists bumps and heavy stacking instead of breaking.
• Made Not to Deform: it holds its shape and tension over long-distance transport and repeated stacking, so your bundles stay tight.
• Built for Sharp Loads: the wider face will not cut into the goods the way a thin strap can on bricks and metal coils.
• Rust-Proof and Safe: being plastic, it never rusts and has no sharp edges, so it is safe to handle and will not stain goods.
• Recyclable: an eco-friendly material that replaces steel banding and can be recycled.

If you are unsure whether this is the right strap, here is the simple rule I give every new buyer. Choose the 1409 when your goods are genuinely heavy and hard-edged — bricks, cotton and textile bales, steel coils, and medium-heavy pallet cargo. These are exactly the loads that snap or loosen a thin strap, and the 14 mm x 0.9 mm build is designed to hold them. If your loads are light, save money and use our lighter 12 mm straps; if your loads are extremely heavy, step up to our 19 mm strap. Still not sure? Send me a photo of your load and I will tell you honestly which size fits.

Every 1409 roll is made on our own line from high-strength new PET raw material. Running one recipe at volume is how I keep the tensile strength and impact resistance the same on every roll.

On heavy loads like bricks and metal coils, buyers often assume steel is the safe choice. Here is the simple comparison:

In short: for heavy goods you get a strong, safe hold without the rust, the sharp edges or the metal freight weight.

This 1409 is built for heavy brick bundles, cotton and textile bales, steel coils and medium-heavy pallet cargo, and it is widely used in the building-materials, textile and metal industries. It is the strap that solves the loosening and breaking that ordinary straps suffer on heavy loads. For super-heavy goods, please choose our 19 mm strap.

Here is the 1409 doing the job I designed it for: holding a heavy brick bundle tight, with the wide strap spreading the load so the sharp edges cannot cut through.

On heavy loads a strap failure is expensive, so every batch passes the same checks before it ships:

• Tensile testing: I pull a sample from each batch to confirm the 5040 N breaking strength and the 11%–14% stretch range.
• Dimension inspection: width and thickness are measured to hold the 14 mm and 0.9 mm size.
• Surface inspection: every roll is checked for a clean, even finish with no rough edges or cuts.
• Weld strength check: the heat-sealed joint is tested to confirm weld efficiency of ≥85% of breaking strength, which matters most on a heavy load.

Everything above is backed by a real, auditable company. We are Xiangyang Suhai Machinery Equipment Co., Ltd., founded in February 2011 in Hubei, China, and recognised as a National High-Tech Enterprise (Certificate No. GR202442006492, issued 26 December 2024, valid for three years). We were also selected for Hubei Province's 7th batch of Specialised, Refined, Differentiated and Innovative SMEs — official confirmation of our R&D capability rather than a self-declared claim. Our manufacturing is certified under quality, environmental and occupational health & safety management systems, and our products are supported by SGS test reports. Certificate copies and test reports are available on request for your file.

As the factory, we make the 1409 fit your industry. You can customize the surface (embossed anti-slip or smooth), the colour (green, black, dark green or custom), and the roll length and weight to suit different heavy-duty packaging jobs. Our complete PET strapping lines give a stable monthly output of 3000 tons, so large-volume and repeat orders stay on schedule against a 5 ton minimum. Each roll is wrapped in thick waterproof, dust-proof film and stacked on pallets for stable loading, so it arrives clean and dry for long-distance shipping. Our technical team provides free sample testing and targeted guidance for brick, cotton bale and steel coil packing.

Finished rolls are stacked on pallets and wrapped tight for export — dry, protected and ready to run on your line the day they arrive.

Each roll is wound on a rigid 250 mm core so the heavy strap feeds evenly by hand or in a semi-automatic machine, with no tangles and no wasted strap.

• Q: What is PET strapping, in simple terms? It is a strong plastic belt, made from PET (the same material family as drink bottles), that ties your goods onto a pallet or into a bundle. It does the job of old steel banding but without the rust and sharp edges.
• Q: Is the 1409 right for bricks and cotton bales? Yes. Those are exactly the heavy, hard-edged loads it was designed for — the wider 14 mm width and thicker 0.9 mm body hold them without cutting or stretching loose.
• Q: How much can it hold? Its rated breaking strength is 5040 N, which is roughly 510 kg of pull before it snaps — a big step up from a light strap.
• Q: Do I need a machine, or can I strap by hand? Both work. The 1409 fits simple manual tools and semi-automatic strapping machines, so you can start by hand and scale up later.