Heavy Pallet Logistics PET Packaging Strap 15mm 6000N Anti Deform

Hello, I am the engineer who makes this strap, and I will explain it in plain language even if you are new to strapping. This 1510 is our heavy-duty PET strap: 15 mm wide and a full 1.0 mm thick, sold 20 kg to a roll. It is made for heavy pallet loads and big cargo — machinery, bulk building materials and heavy finished goods — where a thin strap would simply snap. The trick is the width: because the strap is wide, it presses on a bigger area of your goods, so it spreads the pressure and avoids denting or deforming the load. If your pallets are genuinely heavy and travel long distances, this is the grade I would trust.

This is a 1510 roll. The wide 15 mm face and thick 1.0 mm body are what let it carry heavy pallets while spreading the pressure instead of biting into the load.

• Heavy-Duty Strength: a 6000 N breaking strength, roughly 610 kg of pull before it snaps — built for heavy industrial pallets.
• Widened Contact Surface: the 15 mm width spreads the load over a bigger area, which reduces pressure and helps avoid local deformation of your goods.
• Full 1.0 mm Thickness: a thicker body gives high toughness and load-bearing capacity, so it is not easy to break or deform under heavy stacking.
• Anti-Fracture and Anti-Aging: made to keep its strength through long-distance transport and long-term outdoor storage.
• Rust-Proof and Safe: being plastic, it never rusts and has no sharp edges, so it is safe to handle and will not stain goods.
• Recyclable: an eco-friendly material that replaces steel banding and can be recycled.

If you are unsure whether this is the right strap, here is the simple rule I give every new buyer. Choose the 1510 when your loads are heavy and your pallets are large — heavy industrial pallets, big mechanical equipment, bulk building materials and heavy finished goods. It is the next step up from our lighter 15 mm x 0.9 mm strap, thanks to the full 1.0 mm thickness and higher strength. If your loads are only light or medium, save money and choose our 12 mm or 13 mm straps. If your loads are extremely heavy, step up to our 19 mm strap for maximum safety. Still not sure? Send me a photo of your load and I will tell you honestly which size fits.

Every 1510 roll is made on our own line from high-strength new PET raw material. Running one recipe at volume is how I keep the 6000 N strength and toughness the same on every roll.

On heavy pallets, buyers often assume steel is the only safe choice. Here is the simple comparison:

In short: for heavy goods you get a strong, safe hold with less denting, and none of the rust or the metal freight weight.

This 1510 is built for heavy industrial pallets, large mechanical equipment, bulk building materials and super-heavy finished goods, and it is widely used in logistics and manufacturing for long-distance cargo transport. For ultra-heavy loads, please choose our 19 mm strap for maximum safety.

Here is the 1510 doing the job I designed it for: holding a heavy industrial pallet tight, with the wide strap spreading the pressure so the goods are not dented.

On a heavy load a strap failure is expensive, so every batch passes the same checks before it ships:

• Tensile testing: I pull a sample from each batch to confirm the 6000 N breaking strength and the 11%–14% stretch range.
• Dimension inspection: width and thickness are measured to hold the 15 mm and 1.0 mm size.
• Surface inspection: every roll is checked for a clean, even finish with no rough edges or cuts.
• Weld strength check: the heat-sealed joint is tested to confirm weld efficiency of ≥85% of breaking strength — the joint is where most failures happen on a heavy load.

Everything above is backed by a real, auditable company. We are Xiangyang Suhai Machinery Equipment Co., Ltd., founded in February 2011 in Hubei, China, and recognised as a National High-Tech Enterprise (Certificate No. GR202442006492, issued 26 December 2024, valid for three years). We were also selected for Hubei Province's 7th batch of Specialised, Refined, Differentiated and Innovative SMEs — official confirmation of our R&D capability rather than a self-declared claim. Our manufacturing is certified under quality, environmental and occupational health & safety management systems, and our products are supported by SGS test reports. Certificate copies and test reports are available on request for your file.

As the factory, we make the 1510 easy to buy in bulk. Our complete PET strapping lines give a stable monthly output of 3000 tons, so large-volume and repeat wholesale orders stay on schedule against a 5 ton minimum, at a factory-direct wholesale price. You can customize the surface (embossed anti-slip or smooth), the colour (green, black, dark green or custom), and the roll length and weight. Each roll is wrapped in thick waterproof, dust-proof film and stacked on pallets for stable loading, so it arrives clean and dry for long-distance shipping. Our team provides free sample verification, load-matching consultation and after-sales packaging guidance.

Finished rolls are stacked on pallets and wrapped tight for export — dry, protected and ready to run on your line the day they arrive.

Each roll is wound on a rigid 250 mm core so the heavy strap feeds evenly by hand or in a machine, with no tangles and no wasted strap.

• Q: What is PET strapping, in simple terms? It is a strong plastic belt, made from PET (the same material family as drink bottles), that ties your goods onto a pallet or into a bundle. It does the job of old steel banding but without the rust and sharp edges.
• Q: What is the 1510 best for? Heavy industrial pallets, large mechanical equipment, bulk building materials and heavy finished goods. It is our heavy-duty grade, one step below the very biggest 19 mm strap.
• Q: Why does the wider strap matter? A 15 mm width presses on a bigger area of the load, so it spreads the pressure and helps stop the goods from being dented or deformed — important for heavy, soft-edged cargo.
• Q: Do I need a machine, or can I strap by hand? Both work. The 1510 fits manual tools and semi-automatic strapping machines, so you can start by hand and scale up later.